Honeywell Performance Series User Manual

Getting Started
21
Setting Up the NVR with the Startup Wizard
After the device initialization, the Startup Wizard opens.
Figure 2-11 Startup Wizard
Using the wizard, you can:
• Configure general settings (device name, number, language, video standard)
• Set the date and time
• Configure video encoding settings
• Set up a recording schedule
• Configure recording settings
• Configure network settings
Using the Startup Wizard
1. Click Next to go to the GENERAL window.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet