Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
126
Figure 10-11 Voice Prompt Schedule Configuration Window
4. Click Apply to save your settings.
5. If you want to save your settings and exit the SETTING menu, click OK.
Configuring Account Settings
You can add, edit, or delete user accounts. By default, the NVR has an admin user account
and a default user account. The admin user account has permission to perform all the
operation and configuration functions of the NVR. The default user account only has
permission to monitor live video.
Managing User Accounts and Groups
To add a user account
1. Go to Main Menu  SETTING  SYSTEM  ACCOUNT  User.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet