Honeywell Performance Series User Manual

Configuring System Settings
125
Figure 10-10 Voice Prompt File Configuration Window
2. Click Add to add a new audio file for Voice Prompts. You must have a connected USB
device with audio files saved to it.
3. Double-click on folders to navigate to the new voice prompt file, select the check box for
the file(s) you want to add and click Import. Click OK to return to the previous page. The
file will populate in the File Manage table.
You can Play, Rename, or Delete the file using the table controls. Use the Volume slider
to set the volume level.
Configuring Voice Prompt Schedules
Use the Voice Prompt Schedules screen to set the voice prompt schedule and timing. With
the schedules, different voice prompt audio files can be enabled for different times of the
day/week. For example, an after hours audio message can be played on weekends and nights.
1. Go to Main Menu  SETTING  SYSTEM  Voice Prompt  Schedule.
2. You can configure up to 6 scheduling periods to repeat on each day.
3. For each voice prompt schedule:
a. Set the time range in the Period field.
b. Select the voice prompt file to be played from the File Name drop-down list.
c. Enter the number of times the voice prompt should repeat in the Repeat field and set
the interval between repetitions in minutes in the Interval field.
d. Select the audio device to play the voice prompt from the Output drop-down list.
e. Place a check in the check box for each period that you configure.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet