Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
228
Figure 12-109 Upgrade Interface
1. Click Browse, then click to select the upgrade file.
2. Click Upgrade to begin the update. The file name will end with .bin.
Note
During the upgrade process, do not unplug the power cable, network cable, or
shut down the device.
CAUTION
An improper upgrade program could result in a device malfunction.
Playback
This chapter includes descriptions of the following:
• Playing back recorded video
• Playing back slices
• Downloading recorded video
• Playing back recorded events with the Smart Player
Playing Back Recorded Video
1. Click the Playback tab at the top of the Main window.
The Playback interface appears.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet