Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
158
Adjusts the monitor’s video hue.
Adjusts the monitor’s video hue.
To return the NVR system to default settings, click Reset.
Note All of these configurations apply to the Web Viewer only.
Information
Version
1. Click Info to see the Info menu tree.
2. Click Version to open the Version interface.
Figure 12-23 Version Interface
Here you can view the recording channel, the alarm input/output information, the software
version, and the release date. None of these values can be changed; they are viewable only.
Log
Click Log in the Info menu to open the Log configuration interface.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet