Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
254
16 Appendix C MAXPRO
®
Cloud
This appendix contains the following section:
Configuring for MAXPRO Cloud Mode, on page 254
Configuring for MAXPRO Cloud Mode
These cloud-ready devices can be standalone devices or can easily be connected to
Honeywell's MAXPRO Cloud platform to create a fully integrated managed cloud solution.
When used in MAXPRO Cloud mode, this device becomes a MAXPRO Cloud appliance that
creates a secure connection to the cloud, and has the ability to stream high quality video
while managing bandwidth. Critical events can be captured locally at higher resolution and
frame rates, and then also stored in the cloud for safe and secure backup.
The MAXPRO Cloud solution provides the following additional added value for customers and
dealers:
• Access on the go. View live or recorded video anytime anywhere on your PC, MAC, laptop,
or mobile device.
• Ease of remote management, configuration and changes, f/w updates, and increase
managed services from a single login.
• Real-time informative notifications with clip links and alerts for health, status, and critical
events.
• Verification of site alarms, and reduction of false alarm costs and call outs.
• Adding cloud storage on the go.
Note
A MAXPRO Cloud service subscription is required. Please
contact Honeywell Customer Service for details. See the back
cover for contact information.
To switch to MAXPRO Cloud mode:
1. Go to Main Menu  OPERATION, then click MAXPRO CLOUD.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet