Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
68
Figure 7-7 Network DDNS Settings Window
2. On the DDNS page, select the Enable check box to enable a DDNS network connection.
3. In the DDNS Type box, select the DDNS service that you want to use.
4. Depending on the DDNS Type you select, you may need to enter the following details:
Host IP: The address appears automatically unless DDNS Type is set to Private DDNS. In
that case, enter the server IP address of your DDNS service provider.
Domain Mode: If DDNS Type is set to Honeywell DDNS, click Default Domain to use the
default domain name or click Custom Domain Name to create your own domain name.
Domain Name: Enter a domain name (if you are not using a default domain name).
You can obtain this from your DDNS service provider.
User Name: If applicable, enter a user name to access your DDNS service.
5. Click Apply to save your settings.
6. If you want to save your settings and exit the SETTING menu, click OK.
7. Restart the NVR for the new network connection settings to take effect.
8. To test the settings, on the DDNS page, click Test.
Configuring Email Settings
1. Go to Main Menu  Setting  NETWORK  Email, the following window is displayed:

Honeywell Performance Series Specifications

General

Brand	Honeywell
Model	Performance Series
Category	IP Camera
Language	English