Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
98
Log: Select the check box to enable logging of the audio detection event.
Voice Prompts: Select the check box to enable the playing of a voice prompt audio file
when an audio detection event is triggered. Use the File Name
drop-down arrow to select the audio file to play for the events.
Buzzer: Select the check box to activate a buzzer noise at the NVR.
6. Click Apply to save your settings. To return to the main menu, click OK.
Configuring People Counting
The people counting feature analyzes the video to count the number of people that pass
through or appear in the video.
1. Go to Main Menu  SETTING  EVENT  PEOPLE COUNTING.
Figure 8-20 People Counting Configuration Screen
2. Select the Channel to configure for people counting from the drop-down menu and check
the Enable check box.
3. Click RULE to set up an area for people counting. You can move or resize the area using
your mouse. To move the area, drag one of the sides. To resize the area, drag one of the
corner handles.

Honeywell Performance Series Specifications

General

Brand	Honeywell
Model	Performance Series
Category	IP Camera
Language	English