Performance Series Network Video Recorder User Guide
30
For example, to move channel 2 to the top left position occupied by channel 1, click channel
2, drag it to channel 1’s position, then release the mouse button.
Controlling PTZ Cameras
This section describes how to do the following:
• Access the PTZ control panel
• Configure PTZ connection settings
• Configure and call PTZ presets, tours, and patterns
Working with the PTZ Control Panel
You can control a PTZ camera connected to the NVR through a network connection using the
on-screen PTZ control panel.
Basic PTZ Control Panel
Figure 3-5 PTZ Control Panel
Table 3-3 PTZ Controls
# Name Function
1 Direction keys
Direct camera movement.
2 Speed
Adjust the camera speed. Select a value between 1 and 8.
3 Expand Arrow
Expand the control panel to display additional options.
4 PTZ Trace
Direct camera movement by dragging the mouse. Zoom
in and out by rotating the wheel button.
Adjust the camera’s zoom, focus, and iris settings:
•
Decrease zoom (–), increase zoom (+)
•
Focus near (–), focus far (+)
Iris close (–), iris open (+)
To Next Page
Loading...
Need help?
General