Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
138
x indicates there is an error.
- indicates that there is no HDD.
? indicates that a HDD is damaged.
Device Name: Shows the name you have given the device.
Physical Position: Describes the hard drive bay where the hard drive is installed.
Type: Indicates the HDD type (for example, Read/Write).
Free Space: Indicates the amount of free space remaining on the HDD.
Total Space: Indicates the total capacity of the HDD.
Status: Indicates the operating status of the HDD.
S.M.A.R.T.: Indicates S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) status.
3. In the list of HDDs, double-click a HDD to view more details .
Figure 11-2 S.M.A.R.T. Information Window
4. Right-click to return to the previous screen.
Viewing Recording Information
Go to Main Menu  INFO  SYSTEM RECORD.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet