Honeywell Performance Series User Manual

Configuring Camera Settings
53
6 Configuring Camera Settings
This chapter contains the following sections:
• Adding a Camera on page 53.
• Configuring Camera Image Settings on page 55.
• Configuring Snapshot Settings on page 57.
• Configuring Encoding Settings on page 58.
• Configuring the Text Overlay on page 59.
• Changing a Camera Name on page 60.
Adding a Camera
Adding a Camera by Searching
1. Go to Main Menu  Setting  CAMERA  Registration, the following window is
displayed:
Figure 6-1 Adding a Camera Device
2. Search the camera.
Automatically Search: Click Device Search to automatically find IP cameras.
Search by IP Address or MAC Address: Select IP Address or MAC Address in the
dropdown list next to Device Search, enter the IP Address or MAC Address and Click
Search.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet