Honeywell Performance Series User Manual

Web Client Operation
159
Figure 12-24 Log Configuration Interface
Table 12-5 Log Configurations
Configuration Description
Start Time Set a start time for the log.
End Time Set an end time for the log.
Type
Select from System, Config Operation, Storage, Alarm,
Record Operation, Account, Clear Log, Playback,
Connection, and All.
Search
Click Search to find a log or logs that fit the search
requirements (Start time, End time, and Type).
You can click Stop to terminate the current search.
System Log
Info
Select one log item to see its detailed information.
Remove
Click to clear the found log files.
Note You cannot clear by log file.
Backup
Click to backup the currently selected files to the selected
PC.
Online User
Click Online Users in the Info menu to open the Online User interface.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet