Performance Series Network Video Recorder User Guide
20
• If you didn’t set the unlock pattern, device displays the password login window, see Figure
2-8.
Note
Click Switch User, NVR goes to general user login interface.
The default user name is admin. Select a user from the
username dropdown list and login via this user.
2. Click and the following figure is displayed.
Figure 2-9 Reset – Security Question
Enter the correct answers here.
3. Click Next. NVR displays the reset password window.
Figure 2-10 Reset – Password
4. Enter the new password and then confirm.
Note
STRONG PASSWORD RECOMMENDED-For your device own
safety, please create a strong password of your own choosing.
The password shall be at least 8-digit containing at least two
types of the following categories: letters, numbers and
symbols. We also recommend you change your password
periodically especially in the high security system.
5. Click OK to complete the setup.
To Next Page
Loading...
Need help?
General
