Configuring Storage Settings
109
Figure 9-5 Network FTP Window
2. On the FTP page, click the Enable check box to enable uploading images to an FTP
server.
3. Configure the following settings:
Host IP: Enter the address of the FTP server.
Port: Enter the port of the FTP server.
Username: Enter the user name for logging on to the FTP server.
Password: Enter the password for logging on to the FTP server.
Anonymous: Select the check box to hide user name when logged on to the FTP server.
Remote Directory: Enter a name for the remote directory. If this is left blank, the NVR will
automatically create folder names.
File Size: This is the maximum size for image files being uploaded to the FTP server. Enter
a value between 0 and 65535 MB.
Image Upload Interval: This is the interval for uploading images to the FTP server. Enter a
time between 1 and 600 seconds.
Channel: Select a channel to upload images from, or select All to select all channels.
Weekday: Select a day of the week to upload images on, or select All to upload images
every day.
Time Periods: You can configure up to two time periods for uploading images. For each
period, select either Alarm&Analytics, Motion, or Regular images.
4. Click Apply to save your settings. To test the FTP connection, click Test.
5. If you want to save your settings and exit the SETTING menu, click OK.
To Next Page
Loading...
Need help?
General