Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
2
Storage
• Supports central server backup that follows your configuration and setup in Alarm or
Schedule settings.
• Supports recording through the Internet. The recorded files are stored on the client’s PC.
• Supports network storage, such as FTP, NAS.
Alarm
• Responds to external alarms almost instantly (within 200 milliseconds), based on your
pre-defined relay setup. You can also configure a visual and/or noise prompt (if
supported by a pre-recorded noise) upon alarm detection.
• Supports central alarm server setup, so that alarm information can automatically and
remotely notify users. The alarm input can be derived from various connected peripheral
devices.
Network Monitor
• The NVR supports the transmission of audio/video data that is compressed by an IP
camera, which is then decoded for display. The delay time is less than 500 ms (sufficient
network bandwidth support is required).
• Supports a maximum of 10 connections.
• Compatible to broadcast audio/video with the following transmission protocols: HTTP,
TCP, UDP, MULTICAST, RTP/RTCP.
• Transmits some alarm data or alarm information through SMTP.
• Supports Internet access through the WAN.
Window Split
Video compression plus a digital process allows the NVR to split the monitor screen to show
four video channels at the same time.
Recording
Supports a schedule for recording. The recorded files can be saved in the HDD, on the client’s
PC, or on a network storage server. You can search and view the recorded video that is stored
locally or through the Internet connection.
Backup
Supports backing up video, through the network, to a USB 2.0 device. The recorded files can
be saved on the network storage server, on a peripheral USB 2.0 device, or to a burner, for
example.
Network Management
• Supports NVR configuration and management through the Ethernet.
• Supports device management through the Internet.
Peripheral Equipment Management
• Supports peripheral equipment management such as protocol setup and port
connection.
• Supports transparent data transmission such as RS232 (RS-422) and RS485 (RS-485).
Auxiliary

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet