Honeywell Performance Series User Manual

Web Client Operation
149
Figure 12-5 Warning Message 1
If you upgrade the firmware from previous version to this version (20190129) and if you
uncheck Email and Security Question in the previous version, it will display the following
message after the system reboot.
Figure 12-6 Warning Message 2
5. After you configured the password protection settings, the following figure is displayed:
Figure 12-7 Successful
Click OK and the following window is displayed:

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet