Honeywell Performance Series User Manual

Web Client Operation
207
Voice Prompts
Select the check box to enable the playing of a voice prompt audio file
when the alarm is detected. Use the File Name drop-down list to select
the audio file to play when the alarm is detected.
Show Message
Click to enable a pop-up message on your local host PC screen to let
you know an alarm has occurred.
Send Email
The system can send an email when an alarm is detected. Go to
Network

Email to configure the email settings.
Buzzer
Click to enable the Buzzer function. When an alarm occurs, the buzzer
beeps.
Message
Select the check box to send a text message when alarm events are
detected. Go to Network

3G

Mobile to configure messaging
settings.
Log Select the check box to enable logging of alarm events.
Configuring POS
Note
This function is only available for
HEN081*4/HEN162*4/HEN163*4/HEN161*4/HEN322*4/HEN323*
4/HEN321*4/HEN642*4/HEN643*4.
Use the POS settings screen to setup a connection to a point of sales device, such as a cash
register, to enable POS info to be synchronized with video data.
1. Go to SETUPEVENTPOS, the following window is displayed.
Figure 12-79 POS Configuration Interface
2. Select a POS name in the Name dropdown list. Click to edit the name if you want.
3. Select the Enable checkbox to enable the POS that you select in step 2.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet