Performance Series Network Video Recorder User Guide
222
• User management involves assigning privileges to groups, and users to groups. User
names can not be the same as group names; user names and group names must be
unique. Users can belong to only one group.
Click Account under SYSTEM to open the Account settings configuration interface.
User
Name
Figure 12-98 User Name Account Configurations
There are two default users:
• admin
• a hidden user
The hidden default user is for internal use only, and cannot be deleted. If users log in without
selecting a login user, the hidden default user is automatically used. You can configure some
rights for the default hidden user, such as monitor rights so that the user can view channels
without logging in.
Note
User rights cannot exceed group rights.
General users should have fewer rights than administrators.
Adding a User
1. Click Add User. The Add User configuration interface opens.
2. Enter a Username and a Password. Re-enter the Password to confirm it.
3. Select a Group.
4. Select System, Playback, and Monitor privileges.
5. Click OK to save these new settings.
To Next Page
Loading...
Need help?
General
