Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
18
Draw the unlock patterns. You will be asked to draw two times of patterns. Make sure they
are the same.
3. Click Next and the following window is displayed:
Figure 2-4 Device Initialization-Password Protection
Security Question: Enter the Security Questions. You should enter all the three security
questions.
If you uncheck Security Question, a warning message will be displayed as below:
Figure 2-5 Warning Message 1
If you upgrade the firmware from previous version to this version (20190129) and if you
uncheck Security Question in the previous version, it will display the following message
after the system reboot.

Honeywell Performance Series Specifications

General

IR Range	Up to 30m (98ft)
Weatherproof Rating	IP66
Power Supply	PoE (Power over Ethernet) IEEE 802.3af, 12 VDC
Image Sensor	1/2.8" CMOS
Vandal Resistance	IK10
Video Compression	H.265/H.264/MJPEG
Storage	MicroSD card slot (up to 256GB)
Network Connectivity	10/100 Mbps Ethernet