Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
34
Figure 3-13 Tour
4. In the Patrol No. box, enter a number for the tour.
5. Click Add Preset to add the preset to the tour.
6. Repeat steps 1 through 5 to add additional presets to the tour.
• To delete a preset, enter the number of the preset that you want to delete in the Preset
box, and then click Del Preset.
• To delete a tour, enter the number of the tour that you want to delete in the Patrol No.
box, and then click Del Tour.
Note Some protocols do not support the Del Preset function.
Configuring PTZ Patterns
You can record a series of PTZ movements as a pattern. When you call the pattern in live view
mode, the PTZ camera automatically moves along the path you have defined.
1. On the expanded PTZ control panel, click the PTZ Setting button.
Figure 3-14 PTZ Setting Button
2. Select the Pattern tab for Pattern setting options.
3. In the Pattern box, enter a number for the pattern.
Figure 3-15 Pattern
Click Start, and then use the direction arrows to direct the camera.
4. When you have finished directing the camera pattern, click End.

Honeywell Performance Series Specifications

General

Brand	Honeywell
Model	Performance Series
Category	IP Camera
Language	English