Honeywell Performance Series User Manual

Performance Series Network Video Recorder User Guide
72
Figure 7-11 Network SNMP Settings Window
2. On the SNMP page, select the Enable check box to enable SNMP.
3. Configure the following settings:
Version: Select the check boxes of the SNMP version that you are using.
SNMP Port: The default setting is 161.
Read Community: The default setting is public.
Write Community: The default setting is private.
Trap Access: Enter the IP address of the computer running SNMP software.
Trap Port: The default setting is 162.
4. If SNMP Version V3 is selected, the following settings are also configurable:
ReadOnly User: The default setting is public.
Read/Write User: The default setting is private.
Authorize Type: Select the authorization type, MD5 or SHA, for both the
ReadOnly and Read/Write users. The default setting is MD5.
Password: Enter the authorization passwords for both the ReadOnly and Read/Write
users.
Encryption Type: Select the encryption type for both the ReadOnly and Read/Write users.
The default setting is CBC-DES and is currently the only encryption option.
Password: Enter the encryption passwords for both the ReadOnly and Read/Write users.
5. Click Apply to save your settings.
6. If you want to save your settings and exit the SETTING menu, click OK.

Honeywell Performance Series Specifications

General

Brand	Honeywell
Model	Performance Series
Category	IP Camera
Language	English