Honeywell Series A - Page 126

5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
126 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Step Action Result
4
Be sure the correct communications
driver name appears in the Driver Name
field. If it doesn't, select the correct one
from the field's dropdown list. Press
<Tab>.
Moves cursor to Supervisory MAC
Address field.
5
Click
button to select the Supervisory
Mac Address set in the ControlNet
module connected to the Supervisory
network. Use 01 for this example. Press
<Tab>.
Moves cursor to Supervisory Slot
Number field.
6
Click
button to select the Slot
number where the ControlNet Module
connected to the Supervisory network is
installed. Use 00 for this example. Press
<Tab>.
Moves cursor to the Module Slot Number
field.