Honeywell Series A - Page 138

5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
138 Experion PKS Series A Fieldbus Interface Module User's Guide R400
Honeywell July 2010
Step Action Result
10
Accept the default value for the Preset
Set Addr Wait Timer (T3) parameter or
key in a new value. This is the preset
value for the SM set address wait timer.
The default value is 45. 0000s. Click the
Network Management (LM) tab.
Calls up the Network Management (LM)
tab.
ATTENTION
The remaining parameters on the System Management tab and the Network
Management (Basic) tab are read only and provided for monitoring purposes only.