5. Configuration
5.4. Configuring Fieldbus Components In a Control Strategy
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 139
July 2010 Honeywell
Step Action Result
11
The CIOM-A FIM is the primary
LINKMASTER for the Link. We
recommend that you accept the default
values for the parameters on this tab,
and revisit this tab in the Monitoring tab,
when the FIM/LINK is communicating
with the system. Click the Server History
tab.
Calls up the Server History tab.
ATTENTION
The parameters on the Statistics tab are read only and provided for monitoring
purposes only. The Uncommissioned Devices tab is for use in Monitoring mode with
FIM/LINK communicating with devices. The Version tab is only valid with the Version
Control System license option and is read only in the Project mode.
To Next Page
Loading...
