3. Fieldbus Integration With Experion System
3.8. Block Instantiation Support
R400 Experion PKS Series A Fieldbus Interface Module User's Guide 93
July 2010 Honeywell
If you want
to . . .
Then, Notes and References
Add
instantiated
block to
CM.
See Adding blocks to CM for sample
loop for reference.
You add instantiated blocks
to a Control Module the
same way you do fixed
blocks. They also are
configured in the same way
and have the same graphical
appearance as shown here.
Instantiate
an
instantiable
block in a
physical
device.
Load the configured device from
Project containing the desired number
of function blocks as outlined in the
next row.
Block instantiation in a
physical device only
occurs during a load.
To Next Page
Loading...
