Disable Embedded Jetdirect I/O
Use the following procedure to disable the Embedded Jetdirect functionality:
1. Turn the device off.
2. Turn the device on.
3. After the first LED illuminates (and before the memory count displays), press and hold the 6 key.
4. When all three LEDs illuminate, release the 6 key.
5. Press the 3 key.
6. When Embedded LAN Disable displays, press the 6 key.
7. Allow the device to finish the boot process.
108 Chapter 3 Manage and maintain the device ENWW
To Next Page
Loading...