HP LaserJet M4345 MFP - Fax accessory

2. Push the DIMM locking arms away from the DIMM to release it. Remove the DIMM
Figure 5-35 Remove the DIMM
Fax accessory
WARNING! The MFP contains components that are sensitive to electrostatic discharge
(ESD). Always perform service work at an ESD-protected workstation. If an ESD-protected
workstation is not available, discharge body static by grasping the MFP chassis before
touching an ESD-sensitive component. Ground the MFP chassis before servicing the MFP.
1. Remove the formatter cover, and open the formatter-cage door.
244 Chapter 5 Removal and replacement ENWW