Default Fax Options
Table 3-4 Fax Send menu
Menu item Sub-menu item Values Description
Resolution Standard (100x200dpi)
(default)
Fine (200x200dpi)
Superfine (300x300dpi)
Set the resolution for sent documents. Higher
resolution images have more dots per inch (dpi), so
they show more detail. Lower resolution images
have fewer dots per inch and show less detail, but
the file size is smaller.
Fax Header Prepend
Overlay
Select the position of the fax header on the page.
Select Prepend to print the fax header above the fax
content and move the fax content down on the page.
Select Overlay to print the fax header over the top of
the fax content without moving the fax content down.
Using this option could prevent a single-page fax
from flowing onto another page.
Table 3-5 Fax Receive menu
Menu item Values Description
Forward Fax Fax Forwarding
Change PIN
To forward received faxes to another fax device, select Fax
Forwarding and Custom. Type the number of the other fax device
into the Fax Forwarding Number field. Set up a PIN to type every
time you use this menu. This is the same PIN that is used to
access the Fax Printing menu.
Stamp Received Faxes Enabled
Disabled (default)
Add the date, time, sender’s phone number, and page number to
each page of the received.
Fit to Page Enabled
Disabled
Use this feature to shrink faxes that are larger than letter-size or
A4-size so that they can fit onto a page of that size. If it this feature
set to Disabled, faxes larger than letter or A4 flow across multiple
pages.
Fax Paper Tray Select from the list of trays. Select the tray that holds the size and type of paper that you want
to use for incoming faxes.
ENWW Control-panel menus 55
manuals4you.commanuals4you.com
To Next Page
Loading...