Default Copy Options
Table 3-3 Default Copy Options menu
Menu item Sub-menu item Values Description
Number of Copies Type the number of
copies. The factory
default setting is 1.
Set the default number of copies for a copy job.
Number of Sides 1
2
Set the default number of sides for copies.
Staple/Collate Staple None (default)
One left angled
Set up options for stapling and collating sets of
copies.
If collation is selected, the device prints a complete
copy before starting on the next copy. If collation is
not selected, the device prints the first page 1 of all
copies, then the second page, and so on.
Collate Off
On (default)
Edge-To-Edge Normal (recommended)
(default)
Edge-To-Edge Output
If the original document is printed close to the edges,
use the Edge-To-Edge feature to avoid shadows that
can appear along the edges. Combine this feature
with the Reduce/Enlarge feature to ensure that the
entire page is printed on the copies.
54 Chapter 3 Manage and maintain the device ENWW
To Next Page
Loading...