Stapler/stacker system
The stapler/stacker is a paper-handling accessory that can function in the following modes:
●
Stacker mode. Printed paper is directed to the delivery tray. The stacker holds up to 500 sheets
of paper (75 g/m
2
or 20 lb Bond).
●
Stapler/stacker mode. Printed paper is stapled and then directed to the delivery tray. Up to 30
sheets of paper can be stapled, and up to 15 sets of stapled sheets can be stacked.
The following diagram shows the paper flow.
Figure 4-38 Stapler/stacker paper flow
Power-on sequence
The following diagram shows the operational sequence of the stapler/stacker from power-on to
standby mode.
ENWW Stapler/stacker system 171
manuals4you.commanuals4you.com
To Next Page
Loading...