HP LaserJet M4345 MFP - Formatter cover and formatter

3. Pull the ADF-hinge flap away from the MFP to remove it.
Figure 5-29 Remove the ADF-hinge flap (3 of 3)
NOTE To position the ADF-hinge flap correctly when reinstalling it, insert the locator
pins that are in the middle of the plastic mounting-bracket into the first row of slots above
the ADF hinge.
Formatter cover and formatter
1. Slide the formatter cover toward the left side of the MFP and remove it.
Figure 5-30 Remove the formatter cover and formatter (1 of 3)
240 Chapter 5 Removal and replacement ENWW