5. When installing the replacement thermistor, make sure that the thermistor body is fully inserted
into the plastic bracket.
Figure 5-71 Remove the thermistor (4 of 4)
Tray 2 jam-access-cover switch (SW105)
1. Remove the front cover.
2. Open the jam-access door, and then remove two screws (callout 1) and the jam-access-door-
switch cover.
Figure 5-72 Remove the jam-access-cover switch (1 of 3)
ENWW Internal assemblies 265
manuals4you.commanuals4you.com
To Next Page
Loading...