HP LaserJet M4345 MFP - Device software; Supported operating systems

Device software
The printing-system software is included with the device. See the getting started guide for installation
instructions.
The printing system includes software for end users and network administrators, and printer drivers
for access to the features and communication with the computer.
NOTE For a list of printer drivers and updated software, go to http://www.hp.com/go/
m4345_software.
Supported operating systems
The CD-ROM that accompanies the device contains software that runs on the following operating
systems:
●
Microsoft Windows 98 and Windows Millennium Edition (Me)
●
Microsoft Windows NT 4.0 (printer driver only)
●
Microsoft Windows 2000, Windows XP, and Windows Server 2003
●
Macintosh OS Version 9.1 and later, and Macintosh OS X Version 10.1 and later
The most recent printer drivers for all the supported operating systems are available at
http://www.hp.com/support/ljm4345mfp. If you do not have access to the Internet, see the support
flyer that came in the box for information about obtaining the most recent software.
The following table lists the available software for the HP LaserJet M4345 Series MFP.
Software Windows 98/Me Windows
2000/XP/
Server 2003
Mac OS UNIX/Linux OS/2
Windows Installer x x
PCL 5
1
x x
PCL 6 x x
PostScript emulation x x x
HP Easy Printer Care x x
x
2
HP Web Jetadmin
3
x x
Macintosh Installer x
Macintosh PostScript Printer
Description (PPD) files
x
IBM drivers
3
x
Model scripts
3
x
1
Install by using the Add Printer wizard.
2
Mac OS X V10.2 or higher, TCP/IP required
3
Available only on the World Wide Web.
30 Chapter 2 Installation ENWW