Internal assemblies
The procedures in this section describe the removal and replacement of the following components:
●
Reversing-separation-guide assembly
●
Reversing assembly
●
Main fan (FN101) and reversing-unit fan (FN103)
●
Thermistor (TH3)
●
Tray 2 jam-access-cover switch (SW105)
●
Tray 1 assembly
●
Front-cover support
●
Tray 1 feed-assembly
●
Feed-roller assembly
●
DC controller
●
Main motor (M101)
●
DC controller fan (FN104)
●
Print-cartridge fan (FN102)
●
Print-cartridge motor (M102)
●
Top-cover switch (SW101)
●
Registration assembly
●
Paper-pickup-drive assembly
●
Lifter-drive assembly
●
Power-factor-correction (PFC) power supply
●
Engine power supply
●
Paper-feed assembly
●
Tray 2 detection switch
●
Paper-size-detection switch (SW102)
●
Tray 2 paper-present sensor (PS101)
●
Laser/scanner
●
Output-bin-full sensor
Reversing-separation-guide assembly
1. Open the top cover.
ENWW Internal assemblies 253
manuals4you.commanuals4you.com
To Next Page
Loading...