3. Open the jam-access door. Pinch the roller latch to release the roller, and then slide the roller off
of the shaft.
Figure 5-23 Remove the tray 2, 3, 4, or 5 pickup and feed rollers (2 of 2)
Tray 1 pickup roller
1. Open tray 1.
NOTE If the optional envelope-feeder accessory is installed, remove it.
2. Release the two locking tabs on the pickup-roller frame and remove the tray 1 pickup roller.
Figure 5-24 Remove the tray 1 pickup roller
ENWW User-replaceable parts 237
manuals4you.commanuals4you.com
To Next Page
Loading...