4. Open the Administration menu at the device control panel. Open the Print Quality submenu and
change the Toner Density setting.
5. Open the Administration menu at the device control panel. On the Print Quality submenu, open
Optimize and set Line Detail to On.
Blurred print
Defect description
The printed image is blurred.
Possible causes
Operating environment or media in use does not meet HP specifications. Print settings need to be
changed.
Troubleshooting and suggestions
1. Make sure that the type and quality of the media you are using meet HP specifications.
2. Make sure that the environmental specifications for the device are being met.
3. Turn over the stack in the tray. Also, try rotating the stack 180°.
4. Do not use media that already has been run through the device.
5. Decrease the toner density. Open the Administration menu at the device control panel. Open
the Print Quality submenu and change the Toner Density setting.
6. Open the Administration menu at the device control panel. On the Print Quality submenu, open
Optimize and set High Transfer to On.
Random image repetition
ENWW Solve print-quality problems 429
manuals4you.commanuals4you.com
To Next Page
Loading...