HP LaserJet M4345 MFP - Resets menu

Menu item Sub-menu item Sub-menu item Values Description
Manual Sensor Test Test the device sensors and switches for
correct operation. Each sensor is displayed
on the control-panel screen, along with its
status. Manually trip each sensor and
watch for it to change on the screen. Press
the Stop button to abort the test.
Component Test Exercise individual parts independently to
isolate noise, leaking, or other issues. To
start the test, select one of the components.
The test will run the number of times
specified by the Repeat option. You might
be prompted to remove parts from the
device during the test. Press the Stop
button to abort the test.
Print/Stop Test Continuous value
from 0 to 60,000
milliseconds. The
default is 0
milliseconds.
Isolate faults by stopping the device during
the print cycle and observing where in the
process the image degrades. To run the
test, specify a stop time. The next job that
is sent to the device will stop at the
specified time in the process.
Scanner Tests This menu item is used by a service
technician to diagnose potential problems
with the device scanner.
Control Panel LEDs Use this feature to make sure the
components of the control panel are
functioning correctly.
Display
Buttons
Touchscreen
Resets menu
Table 3-17 Resets menu
Menu item Values Description
Clear Local Address Book Clear (button) Use this feature to clear all addresses from the address books that
are stored on the device.
Clear Fax Activity Log Yes
No (default)
Use this feature to clear all events from the Fax Activity Log.
Restore Factory Telecom Setting Restore (button) Use this option to restore the telephone-related settings that are in
the Initial Setup menu to factory default values.
Restore Factory Settings Restore (button) Use this feature to restore all device settings to their factory
defaults.
Clear Maintenance Message Clear (button) Clear the Order Maintenance Kit and Replace Maintenance Kit
warning messages.
Clear Document Feeder
Message
Clear (button) Use this feature to clear the Order Document Feeder Kit and
Replace Document Feeder Kit warning messages.
Reset Supplies New Maintenance Kit (Yes/No) Notify the device that a new maintenance kit or document feeder
kit has been installed.
Table 3-16 Troubleshooting menu (continued)
ENWW Control-panel menus 79
manuals4you.commanuals4you.com