HP LaserJet M4345 MFP - Default Print Options; Time;Scheduling menu

Default Print Options
Table 3-6 Default Print Options menu
Menu item Sub-menu item Values Description
Copies Per Job Type a value. Use this feature to set the default number of copies
for print jobs.
Default Paper Size (List of supported sizes.) Choose a paper size.
Default Custom Paper
Size
Unit of measure Millimeters
Inches
Configure the default paper size that is used when
the user selects Custom as the paper size for a print
job.
X Dimension Configure the width measurement for the Default
Custom Paper Size.
Y Dimension Configure the height measurement for the Default
Custom Paper Size.
Print Sides 1-sided
2-sided
Use this feature to select whether print jobs should
be single-sided or double-sided by default.
2-Sided Format Book style
Flip style
Use this feature to configure the default style for 2-
sided print jobs. If Book style is selected, the back
side of the page is printed the right way up. This
option is for print jobs that are bound along the left
edge. If Flip style is selected, the back side of the
page is printed upside-down. This option is for print
jobs that are bound along the top edge.
Time/Scheduling menu
Use this menu to set options for setting the time and for setting the device to enter and exit sleep
mode.
NOTE Values shown with "(default)" are the factory-default values. Some menu items have
no default.
58 Chapter 3 Manage and maintain the device ENWW