2. Push down on the locking tab (callout 1), and rotate the top of the assembly away from the ADF.
Figure 5-8 Remove the ADF pickup and feed rollers (1 of 2)
3. Release the front (gear end) of the roller-assembly drive-shaft, and slide the assembly toward
the front of the MFP to remove it.
Figure 5-9 Remove the ADF pickup and feed rollers (2 of 2)
ADF separation pad
1. Open the ADF top cover
ENWW User-replaceable parts 229
manuals4you.commanuals4you.com
To Next Page
Loading...