HP LaserJet M4345 MFP - Image defect examples; Light print (partial page); Light print (entire page)

●
Handle transparencies by the edges. Skin oil on the surface of transparencies can cause spots
and smudges.
●
Small, random dark areas on the trailing edge of solid fill pages might be caused by
transparencies sticking together in the output bin. Try printing the job in smaller batches.
●
To show the printed transparency, use a standard overhead projector instead of a reflective
overhead projector.
Image defect examples
Light print (partial page)
Defect description
Printing is light on a portion of the page.
Possible causes
The print cartridge is not installed properly. The media might not meet HP specifications (for
example, the media is too moist or too rough). The toner level in the print cartridge might be low.
Troubleshooting and suggestions
1. Make sure that the print cartridge is fully installed.
2. Verify that the media meets HP specifications.
3. Replace the print cartridge.
Light print (entire page)
Defect description
Printing is light on the entire page.
Possible causes
ENWW Solve print-quality problems 419
manuals4you.commanuals4you.com