HP LaserJet M4345 MFP - Left cover; Top cover

2. Carefully pry off the rear cover using a flat-blade screwdriver. Insert the screwdriver blade and
slightly lift the cover at the five points (callout 1) shown in the following figure.
1
1
Figure 5-202 Claw locations on rear cover
Left cover
1. Remove the delivery tray.
2. Remove the front cover.
3. Remove the rear cover.
4. Unhook two claws (callout 1) and remove the left cover (callout 2).
1
2
Figure 5-203 Remove the left cover
Top cover
1. Remove the delivery tray.
2. Remove the front cover.
3. Remove the rear cover.
ENWW Stapler/stacker components 341
manuals4you.commanuals4you.com