2. Squeeze the two blue tabs on the fuser to release it, and then slide it out of the MFP.
Figure 5-21 Remove the fuser
Tray 2, 3, 4, or 5 pickup and feed rollers
1. Remove the cassette from the tray.
2. Pinch the roller latch (callout 1) to release the roller, and then slide the roller off of the shaft.
Figure 5-22 Remove the tray 2, 3, 4, or 5 pickup and feed rollers (1 of 2)
236 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...