Printing from the 500-sheet feeder
The MFP supports up to three additional 500-sheet feeders (trays 3, 4, and 5).
Figure 4-28 Paper path with 500-sheet feeders installed
The paper-feeder driver controls the 500-sheet feeder operation sequences. An 8-bit microprocessor
in the paper-feeder driver controls the 500-sheet feeder sequences and the communication with the
DC controller PCA.
The paper-feeder driver drives the solenoid in response to the pickup command. The paper-feeder
driver also reports the paper-feeder status to the DC controller PCA.
The printer delivers a charge of +24 Vdc to the paper feeder, which then generates +3.3 V for the
integrated circuits.
154 Chapter 4 Theory of operation ENWW
To Next Page
Loading...