Figure 4-25 Face-down delivery: media enters the reversing unit
After a specified length of time, both motors stop, and the reversing motor begins rotating
counterclockwise. Then, M106 drives the intermediate rollers and the delivery rollers, which guide
the media into the output bin. When M106 begins rotating, the reversing-separation solenoid
releases the reversing rollers, and the media begins traveling in the opposite direction. When the
paper-delivery sensor (PS109) detects the trailing edge of the media, M106 stops rotating.
Figure 4-26 Face-down delivery: media reverses direction
Face-up delivery
As media passes through the fuser-delivery sensor (PS108), the face-up solenoid (SL105) activates
the face-up deflector to prevent media from entering the reversing unit. M106 rotates clockwise and
drives the delivery rollers, which carry the media into the output bin. When PS108 detects the trailing
edge of the media, SL105 turns off and the face-up deflector returns to its home position. When the
paper-delivery sensor (PS109) detects the trailing edge of the media, M106 stops rotating.
ENWW Pickup, feed, and delivery system 149
manuals4you.commanuals4you.com
To Next Page
Loading...