2. Use a flat-blade screwdriver to lift the left end of the metal shaft out of place (near the blue
gear). Slide the transfer roller to the left to remove it.
NOTE When you install the transfer roller, make sure that the black collar on the left
side is oriented correctly, with the open end face-down (the solid end is face-up).
Figure 5-4 Remove the transfer roller
ADF input tray
1. Open the ADF top cover.
Figure 5-5 Remove the ADF input tray (1 of 3)
ENWW User-replaceable parts 227
manuals4you.commanuals4you.com
To Next Page
Loading...