EasyManuals Logo

HP LaserJet M4345 MFP Service Manual

HP LaserJet M4345 MFP
653 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #637 background imageLoading...
Page #637 background image
Declaration of conformity
Declaration of Conformity
according to ISO/IEC Guide 22 and EN 45014
Manufacturer's Name: Hewlett-Packard Company
Manufacturer's Address: 11311 Chinden Boulevard,
Boise, Idaho 83714-1021, USA
declares, that the product
Product Name: HP LaserJet M4345 series
Regulatory Model Number
3)
:
BOISB-0407-00 and BOISB-0407-01
Including: CB425A, CB426A, CB427A, CB428A, BOISB-030800
4
Product Options: ALL
Toner Cartridges: Q5945A
conforms to the following Product Specifications:
Safety: IEC 60950-1:2001 / EN60950-1: 2001 +A11
IEC 60825-1:1993 +A1 +A2 / EN 60825-1:1994 +A1 +A2 (Class 1 Laser/LED Product)
GB4943-2001
EMC:
CISPR 22:1993 +A1 +A2 / EN 55022:1994 +A1 +A2 -- Class B
1)
EN 61000-3-2:2000
EN 61000-3-3:1995 +A1
EN 55024:1998 +A1 +A2
FCC Title 47 CFR, Part 15 Class B
2
/ ICES-003, Issue 4
2)
GB9254-1998, GB17625.1-2003
Supplementary Information:
The product herewith complies with the requirements of the EMC Directive 89/336/EEC and the Low Voltage Directive 73/23/EEC, and
carries the CE-Marking accordingly.
1) The product was tested in a typical configuration with Hewlett-Packard Personal Computer Systems.
2) This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
3) For regulatory purposes, this product is assigned a Regulatory model number. This number should not be confused with the product
name or the product number(s).
4) All worldwide modular approvals for analog fax accessory obtained by Hewlett-Packard under the regulatory model number
BOISB-030800 incorporate the Multi-Tech Systems MT5634SMI Socket Modem Module.
Boise, Idaho , USA
March 29, 2006
For regulatory topics only:
Australia Contact: Product Regulations Manager, Hewlett-Packard Australia Ltd., 31-41 Joseph Street, Blackburn, Victoria 3130, Australia
European Contact: Your Local Hewlett-Packard Sales and Service Office or Hewlett-Packard GmbH, Department HQ-TRE / Standards
Europe, Herrenberger Strasse 140, D-71034 Bblingen, Germany, (FAX: +49-7031-14-3143)
USA Contact: Product Regulations Manager, Hewlett-Packard Company, PO Box 15, Mail Stop 160, Boise, ID 83707-0015, USA,
(Phone: 208-396-6000)
620 Appendix C Regulatory information ENWW

Table of Contents

Other manuals for HP LaserJet M4345 MFP

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP LaserJet M4345 MFP and is the answer not in the manual?

HP LaserJet M4345 MFP Specifications

General IconGeneral
Print TechnologyLaser
FunctionsPrint, copy, scan, fax
Print SpeedUp to 45 ppm
Print ResolutionUp to 1200 x 1200 dpi
Monthly Duty CycleUp to 200, 000 pages
Standard Input Capacity600 sheets
Standard Output Capacity250 sheets
Scanner TypeFlatbed, ADF
Maximum Scan Size216 x 356 mm
Duplex PrintingAutomatic
Memory, standard256 MB
Memory, maximum512 MB
Hard DiskOptional
Print LanguagesHP PCL 6, HP PCL 5e, HP Postscript Level 3 emulation
Paper Handling Input, Standard100-sheet multipurpose tray, 500-sheet input tray
Scan Resolution, OpticalUp to 600 dpi
Scan Speed (Normal, A4)Up to 45 ppm
Automatic Document Feeder Capacity50 sheets
Copy Speed (Black, Normal Quality, A4)Up to 45 cpm
Copy Resolution (Black Text)Up to 600 x 600 dpi
Copy Reduce / Enlarge Settings25 to 400%
Maximum Number of Copies999
Fax ResolutionUp to 300 x 300 dpi
Fax Transmission Speed3 sec per page
ConnectivityEthernet
First Page OutAs fast as 8.5 sec
DisplayLCD
Quick Dialing, Maximum Number100 numbers
Operating System CompatibilityWindows, Mac, Linux
Network ReadyStandard (built-in Ethernet)

Related product manuals