depends upon the quality of the envelopes. When selecting envelopes, consider the following
components:
●
Weight: The weight of the envelope paper should not exceed 105g/m
2
(28 lb) or jamming might
occur.
●
Construction: Prior to printing, envelopes should lie flat with less than 6 mm (0.25 inch) curl,
and should not contain air.
●
Condition: Envelopes should not be wrinkled, nicked, or otherwise damaged.
●
Temperature: You should use envelopes that are compatible with the heat and pressure of the
printer.
●
Size: You should use only envelopes within the following size ranges.
●
Minimum: 76 x 127 mm (3 x 5 inches)
●
Maximum: 216 x 356 mm (8.5 x 14 inches)
NOTE Use only tray 1 or the optional envelope feeder to print envelopes. You might
experience some jams when using any media with a length less than 178 mm (7 inches). This
might be caused by paper that has been affected by environmental conditions. For optimum
performance, make sure you are storing and handling the paper correctly. Also, choose
envelopes in the printer driver.
Envelopes with double side seams
Double side-seam construction has vertical seams at both ends of the envelope rather than diagonal
seams. This style might be more likely to wrinkle. Be sure the seam extends all the way to the corner
of the envelope as illustrated below.
1 Acceptable envelope construction
2 Unacceptable envelope construction
ENWW Media specifications 15
manuals4you.commanuals4you.com
To Next Page
Loading...