User-replaceable parts
The procedures in this section describe the removal and replacement of the following user-
replaceable parts:
●
Print cartridge
●
Control-panel overlays
●
Control panel
●
Transfer roller
●
ADF input tray
●
ADF pickup and feed rollers
●
ADF separation pad
●
ADF delivery guide (clear mylar sheet)
●
Output-bin assembly
●
Duplex-printing unit
●
Fuser-entrance guide
●
Fuser
●
Tray 2, 3, 4, or 5 pickup and feed rollers
●
Tray 1 pickup roller
●
Scanner filter cover and scanner filter
●
ADF-hinge flap
●
Formatter cover and formatter
●
Hard drive
●
DIMM
●
Fax accessory
Print cartridge
1. Open the top cover.
2. Grasp the print cartridge, and remove it from the MFP.
Control-panel overlays
Use a small, flat-blade screwdriver to release the two control-panel overlays (callout 1).
224 Chapter 5 Removal and replacement ENWW
To Next Page
Loading...