2. Remove three screws (callout 1).
Figure 5-51 Remove the reversing assembly (1 of 8)
3. Unlock the tab on the right-reverse-assembly-drive cover, and remove the cover.
Figure 5-52 Remove the reversing assembly (2 of 8)
CAUTION The spring that is under the right-reversing-assembly lever is not captive. Do
not lose the spring that is under the lever when you remove the cover. Make sure you
seat the spring correctly on the chassis pedestal when you reinstall the cover.
ENWW Internal assemblies 255
manuals4you.commanuals4you.com
To Next Page
Loading...