2. Unsnap the mylar-holder-assembly hinges from the hinge pins.
Figure 5-185 Remove the ADF white mylar-backing (2 of 3)
3. Release the ADF white mylar-backing locking tab, and lift the assembly up and out of the ADF.
Figure 5-186 Remove the ADF white mylar-backing (3 of 3)
NOTE The springs behind the ADF white mylar-backing assembly are not captive. Do
not lose the springs when you remove the ADF white mylar-backing assembly.
ENWW ADF components 329
manuals4you.commanuals4you.com
To Next Page
Loading...